Amazing Features of our Rotary Union.
Best Rates & Quality products available here .
Rotary Joint for Steam Service
• Designed for steam service
• Two internal support guides
• Renewable seal plate
• Maximum carbon guide separation
• Increased life and reliability
• Lower maintenance and repair cost
• Improved joint and syphon support
Spare of Rotary Joint
MATERIAL: PURE CARBON OR CFT (CARBON FILLED TEFLON) OR GERMAN SHRUNKH / ANTIMONY.
SIZE: STANDARD (1” TO 6”) OR
AS PER SAMPLE AND DRAWING.
Stream Trap
A steam trap is a device used to discharge condensate and non- condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically.
TD3 - Thermo Dynamic Steam Trap
TD3 – Work After hot condensate flows into the trap, steam enters it. As the velocity of the fluid increases, the pressure under the seat exerted by the steam decreases. At the same time the pressure in the pressure chamber above the disc increases. The disc is pressed down and closes.
Rotary Joints for Steam and Thermal Oil Service
DNOR Rotary Joint
• Designed for oil, water, and steam • Two internal support guides • Optimized seal diameter • CoNVex seal ring in compression • Maximum carbon guide separation • Increased life and reliability • Extended seal life, reduced maintenance • Self-aligning seal, longer life • ImproVed joint and syphon support
Rotary Unions for Cold Water Service
Model - DN Rotary Unions
• Balanced seal • Deep-grooVe ball bearings • Full flow area • External loaded springs • Matched seal faces • Long running life, dry running capability • Low Pressure Drop • Uniform seal loading • Materials selected for specified sERVice • Rigid mounting and accurate alignment • Reduced maintenance
S.S.Corrugated Hose Pipe
MATERIAL: S.S. CORRUGATED HOSE PIPE
SIZE: 1/2: TO 8” WITH ANY LENGTH.
TYPE: WITH SINGLE WIRE BRAIDED OR DOUBLE WIRE BRAIDED
Syphon Elbow
Syphon Elbow application to connect the two siphon tube in 45 degree angle in Drier for remoVe condensate water. Material – S.S.304 or Gunmetal
GLOBE VALVE
SIZE: ½” TO 14”
MATERIAL OF CONSTRUCTION : CI , WCB, GUN METAL AND S.S END CONNECTION TYPE: THREADED AND FLANGE END. Body: CI, WCB / CS, SS
Internal Part : Stainless Steel (BAR STOCK)
RATING CLASS: 150, 300, 800.
Globe valve
Material: GUN METAL
END TYPE : THREAD END
SIZE: 15 MM , 20 MM , 25 MM , 45 MM
Sight Glass / Tube Glass
Sight Glass application to show the Steam and Condensate Water in Steam Line Material - M.S Glass -Hi-Toughen borosilicate glass
SAFETY VALVE (NON IBR)
BODY : WCB, GUN METAL SPRING : SPRING STEEL
MAX. SET PRESSURE : 14
kg/cm2
ENDS : FLANGED TO DIN 2545
HYD – TEST :
Pressure BODY : 60 kg/cm2
SIZE : 25 MM TO 150 MM
clean codes
Lorem Ipsum is simply dummy text of the printing and typesetting industry
clean codes
Lorem Ipsum is simply dummy text of the printing and typesetting industry
clean codes
Lorem Ipsum is simply dummy text of the printing and typesetting industry